Pro Pack Jig Kit for TimberTech IRX (2" & 3" Level + 3" Stair + 45 Degree Corner Jig Kit)
The ultimate setup for faster, cleaner, and more consistent installs.
This all-in-one Pro Pack gives you everything you need to tackle level, stair, continuous top rail, and 45° corner installations for TimberTech® Impression Rail Express. Includes jigs for 3” Level, 2” Level, 3” Stair, and 45-Degree Corner installs — plus two 6" #2 Square Drive Bits to make driving screws faster and easier (and to have a backup ready when one walks off).
3” Level Rail Jig
Speed up your installs with perfectly placed clips every time. These jigs snap securely to the post, holding your clips at the correct height and centered — no measuring, no guessing, no hassle.
Fits 3" aluminum posts (TimberTech IRX, Aria Railings, Harmony Railings)
Sets clip height exactly 2 7/8" above base (per manufacturer specs)
Open-bottom section helps center the top of the rail panel
Markings aligned with top and bottom of clip for easy adjustments
Durable and jobsite tough — backed by our 30-day break-it-we’ll-replace-it guarantee
2” Level Rail Jig
Fits the 2” IRX Posts used in Continuous Top Rail installations. Centers railing clip at the correct height and helps center top rail with open section.
3” Stair Rail Jig
Simplifies stair installs with clean, consistent clip placement on every post.
Fits 3" aluminum posts with stair clips (TimberTech IRX, Aria, Harmony)
Centers clips and helps vertical alignment with guide lines and viewing windows
Snaps on securely for hands-free setup
Open-bottom section aids with stair panel alignment
Tool & Trade 45 Degree Corner 2-Piece Jig Kit for TimberTech Impression Rail Express
Installing 45° corners just got faster, easier, and more accurate.
This two-piece kit simplifies corner installs on TimberTech IRX. The 22.5° Jig automatically centers clips at the correct height, while integrated Marking Templates make cutting railing components consistent every time. Just mark the long points, measure, cut, and install. The included 22.5° Square speeds up post alignment and ensures repeatable layouts.
Features:
Precision placement – Locks clips at the manufacturer-specified 2 7/8" height and centers them perfectly on the post
Dual-sided design – Reversible for left or right-facing installs
Solo-friendly – Snaps securely onto the post for a secure fit
Complete templates – Includes marking guides for Railing Panel, Universal Cover (bottom snap cover), and both Classic & Modern Top Rails
Jobsite tough – Skookum as frig, backed by our 30-day break it, we’ll replace it guarantee
Built by a deck builder, for deck builders.
(Not made or endorsed by TimberTech® or The AZEK Company.)
Pro Pack Jig Kit for TimberTech IRX (2" & 3" Level + 3" Stair + 45 Degree Corner Jig Kit)
The ultimate setup for faster, cleaner, and more consistent installs.
This all-in-one Pro Pack gives you everything you need to tackle level, stair, continuous top rail, and 45° corner installations for TimberTech® Impression Rail Express. Includes jigs for 3” Level, 2” Level, 3” Stair, and 45-Degree Corner installs — plus two 6" #2 Square Drive Bits to make driving screws faster and easier (and to have a backup ready when one walks off).
3” Level Rail Jig
Speed up your installs with perfectly placed clips every time. These jigs snap securely to the post, holding your clips at the correct height and centered — no measuring, no guessing, no hassle.
Fits 3" aluminum posts (TimberTech IRX, Aria Railings, Harmony Railings)
Sets clip height exactly 2 7/8" above base (per manufacturer specs)
Open-bottom section helps center the top of the rail panel
Markings aligned with top and bottom of clip for easy adjustments
Durable and jobsite tough — backed by our 30-day break-it-we’ll-replace-it guarantee
2” Level Rail Jig
Fits the 2” IRX Posts used in Continuous Top Rail installations. Centers railing clip at the correct height and helps center top rail with open section.
3” Stair Rail Jig
Simplifies stair installs with clean, consistent clip placement on every post.
Fits 3" aluminum posts with stair clips (TimberTech IRX, Aria, Harmony)
Centers clips and helps vertical alignment with guide lines and viewing windows
Snaps on securely for hands-free setup
Open-bottom section aids with stair panel alignment
Tool & Trade 45 Degree Corner 2-Piece Jig Kit for TimberTech Impression Rail Express
Installing 45° corners just got faster, easier, and more accurate.
This two-piece kit simplifies corner installs on TimberTech IRX. The 22.5° Jig automatically centers clips at the correct height, while integrated Marking Templates make cutting railing components consistent every time. Just mark the long points, measure, cut, and install. The included 22.5° Square speeds up post alignment and ensures repeatable layouts.
Features:
Precision placement – Locks clips at the manufacturer-specified 2 7/8" height and centers them perfectly on the post
Dual-sided design – Reversible for left or right-facing installs
Solo-friendly – Snaps securely onto the post for a secure fit
Complete templates – Includes marking guides for Railing Panel, Universal Cover (bottom snap cover), and both Classic & Modern Top Rails
Jobsite tough – Skookum as frig, backed by our 30-day break it, we’ll replace it guarantee
Built by a deck builder, for deck builders.
(Not made or endorsed by TimberTech® or The AZEK Company.)
